No edit summary |
No edit summary |
||
| Line 8: | Line 8: | ||
| 0 || reset || int flag || - | | 0 || reset || int flag || - | ||
|- | |- | ||
| 1 || getHDQState || - || | | 1 || getHDQState || - || uint64_t state | ||
|- | |- | ||
| 2 || getDeviceConfiguration || - || 354 bytes of stuff | | 2 || getDeviceConfiguration || - || 354 bytes of stuff | ||
Revision as of 16:17, 27 April 2020
AppleHDQGasGaugeControl is a kernel extension for managing the gas gauge device that monitors the battery.
Methods
| Selector | Action | Input | Output |
|---|---|---|---|
| 0 | reset | int flag | - |
| 1 | getHDQState | - | uint64_t state |
| 2 | getDeviceConfiguration | - | 354 bytes of stuff |
| 3 | enableCurrentLog | - | - |
| 6 | hdqBreak | - | - |
| 7 | hdqReadWriteByte | - | - |
| 8 | hdqReadWord | - | - |
| 9 | readBlock | - | - |
| 10 | ctlWriteWord | - | - |
| 11 | ctlReadWord | - | - |
| 14 | drainDataLog | - | - |
| 15 | writeBlock | - | - |
| 15 | interrupts | - | - |
NOTE: this table currently is only showing the selectors, the input / output will be documented later.