SBAccelerometerInterface is a singleton class that can deliver accelerometer events to registered clients. This class is available starting from version 2.2.
Registering clients
| Signature | -(void)clientRequestedAccelerometerEvents:(mach_port_t)port updateInterval:(NSTimeInterval)interval auditToken:(XXStruct_kUSYWB*)token; |
|---|---|
| Available in | 2.2 |
| Signature | -(void)clientRequestedAccelerometerEvents:(mach_port_t)port updateInterval:(NSTimeInterval)interval xThreshold:(float)xThreshold yThreshold:(float)yThreshold zThreshold:(float)zThreshold auditToken:(XXStruct_kUSYWB*)token; |
|---|---|
| Available in | 3.0 – |
Acceleration events are sent to SBAccelerometerClients stored in the interface's private client list. To register a client, you have to go through the clientRequestedAccelerometerEvents:... method.
The x and y threshold should be set to 2, and the z threshold, 0. The auditToken could be kept NULL.
- TODO
Turn on accelerometer events within SpringBoard without client registration
When the SpringBoard is visible (i.e. the active display stack is empty), the accelerometer will be turned off entirely. The following code can force accelerometer events to be reported even when there is no running apps:
SBAccelerometerInterface* interface = [objc_getClass("SBAccelerometerInterface") sharedInstance];
SBAccelerometerClient* client = [[interface valueForKey:@"clients"] lastObject];
client.updateInterval = 0.1; // set to 0 to turn off.
[interface updateSettings];
To obtain the current orientation, listen to the com.apple.springboard.rawOrientation Darwin notification and use the code below to obtain the orientation:
int token;
uint64_t state;
notify_register_check("com.apple.springboard.rawOrientation", &token);
notify_get_state(token, &state);
notify_cancel(token);
UIDeviceOrientation orientation = state;
References